Low Headroom Monorail Hoist
As Wimac Crane Systems, our single beam monorail crane systems help you to transport and unload cargo easily and safely. As Wimac Crane Systems, we use the profiles up to 20 meters long, so that we can walk on longer distance profiles. With our easy-to-use single beam monorail cranes you can get high performance even in the toughest conditions. Being one of the most secure cranes, it is used in many countries thanks to its high lift capacities and working conditions in all cases.
All single girder monorail cranes that we manufacture are used in accordance with FEM, DIN and ISO norms. We also use the same quality and standard in all our products with our CE and ISO certificates.
Our single girder monorail cranes are controlling by remote controls systems. Besides the reducers and motors supply the soft take offs and stops through those high quality products.
All of our single girder monorail cranes are designed according to usage area. Our single girder monorail cranes offer special primer and paint applications based on working conditions and take precautions against corrosion at world standards.
Key Features & Benefits
Technical Specifications
| Capacity SWL (Ton) | Serial Number | Drum Diameter (mm) | Wire Diameter (mm) | Hook P Class | Trolley Weight (kg) | Lifting Speed (m/min) | Lifting Motor Power (kW) | Trolley Wheel Diameter (mm) | Trolley Wheel Bearings | Trolley Drive Motor Power (kW) | End Truck Wheel Diameter (mm) | End Truck Wheel Bearings | Cross Travel Motor Power (kW) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.6 | WU-S 16 | 160 | a8 | Nr1 | 550 | 4 | 1.10 | Ø100 | 6205-2RS | 2 x 0,25 | Ø130 | 6206 | 2x0,55 |
| 3.2 | WU-S 32 | 160 | 8 | Nr2.5 | 550 | 0.7-3.5 | 2.20 | Ø100 | 6205-2RS | 2 x 0,25 | Ø130 | 6206 | 2x0,55 |
| 5 | WU-S 50 | 220 | 10 | Nr4 | 600 | 4 | 4 | Ø130 | 6206-2RS | 2 x 0,37 | Ø160 | 6207 | 2x0,55 |
| 6.3 | WU-S 63 | 220 | 12 | Nr4 | 750 | 4.3 | 5.5 | Ø160 | 6207-2RS | 2 x 0,37 | Ø200 | 6209 | 2x0,75 |
| 8 | WU-S 80 | 270 | 14 | Nr5 | 800 | 3.5 | 5.5 | Ø160 | 6207-2RS | 2 x 0,55 | Ø300 | 6213 | 2x0,75 |
| 10 | WU-S 100 | 270 | 14 | Nr6 | 1000 | 3.5 | 7.5 | Ø160 | 6207-2RS | 2 x 0,55 | Ø300 | 6213 | 2x1,1 |
The products specified in the table above are compatible with FEM M5 & ISO 2m standards.
Additional Information
- The static test load is SWL × 1.25 / dynamic test load is SWL × 1.10
- The products above have a lifting height between 6 and 12 meters
- The products above have a long travel speed of 30 m/min & a cross travel speed of 20 m/min
- Module and number of teeth to be stated with order. Tooth form according to DIN 867 without profile correction. Pressure angle 20 degree.
Explosion-Proof Wire Rope Hoists
Wimac explosion-proof hoists are ATEX certified for safe operation in hazardous environments where explosive gases, vapors, or dust may be present. Every component is designed and certified to prevent ignition sources in classified areas.
Our Ex-proof hoists comply with ATEX Directive 2014/34/EU and are available for Zone 1, Zone 2, Zone 21, and Zone 22 applications. Ideal for oil & gas, chemical processing, pharmaceutical, and grain handling industries. With flameproof motor enclosures, increased safety junction boxes, and intrinsically safe control circuits, these hoists provide reliable lifting solutions in the most demanding hazardous environments.